TroLase ADA Signage
TroLase ADA Signage is a solid, dyed, acrylic based material primarily used for the production of braille and tactile signage. With the added advantage of being UV stable it is ideal for functional signage in indoor and outdoor areas, for cutting out letters and for creating 3-dimensional signs. The thinner options are increasingly becoming a popular medium in the production of architectural model making.
Applications:
- Exterior & Interior Signs
- ADA compliant Braille & Tactile Signage
- 3 Dimensional Signs
- Model Making
- Cut Out Letters
Sheet size in mm:
Full Sheet
1245 x 616 mm / 1220 x 610mm
Half Sheet
610 x 610 mm
Quarter Sheet
610 x 305 mm
Material Features:
Material: Modified acrylic
Cutting method: laser, saw, guillotine
Tolerances: width +/- 1.5 mm; length +/- 3 mm
Loading, please wait... -
LS101-103LS101-103 Clear 0,8mmTroLase ADA Signage
Show details
-
LS101-106LS101-106 Clear 1,6mmTroLase ADA Signage
Show details
-
LS201-103LS201-103 White 0,8mmTroLase ADA Signage
Show details
-
LS201-104LS201-104 White 1mmTroLase ADA Signage
Show details
-
LS201-106LS201-106 White 1,6mmTroLase ADA Signage
Show details
-
LS204-103LS204-103 Bright White 0,8mmTroLase ADA Signage
Show details
-
LS204-104LS204-104 Bright White 1mmTroLase ADA Signage
Show details
-
LS204-106LS204-106 Bright White 1,6mmTroLase ADA Signage
Show details
Tips:
Order TroLase ADA Signage with self-adhesive film applied on the back. This allows you to easily mount
letters cut-out from the material plate on base plates or walls. During assembly use the cut material plate as a template
for spacing and as a line level.
A few tips for best results:
- Materials must be even and without bends or distortions.
- A cutting table should always be used when cutting plastics, in order to lift the material.
- Remove the protective film, in order to prevent discolouration or excessive smoke.
- If excess smoke results, then too much energy is being used. In this case increase the speed.
