How to easily laser engrave functional signage from TroLase
Our tutorial will show you how to easily engrave signage, with a step by step guide on how to insert graphics, define the correct size and cutting lines. Step by step you will be guided to a laser engraved and laser cut sign, including important tips and tricks for using laser materials and laser systems.
Tutorial: How to laser engrave a sign
For this application we have used the popular laser material TroLase in blue/white. Find more details about TroLase here.
Insert the required graphic using the command: ”import“. Ensure the graphic is in black and white mode. Select the vector graphic and group it together using Ctrl+g. Change the size of the grouped graphic according to your requirements.
To manually add a cutting line, insert a rectangle, sized to the desired dimensions. Define the rectangle with a 'Hairline' and the colour R:225, G:0, B:0.
Enter the dimensions of the graphic, +1 mm in height and width, choose the relevant material and define the process options (process mode standard, 500 dpi, enhanced geometries). Send your graphic to JobControl® by hitting the 'JC' button and choose 'Print'.
Set the engraving start positon to begin at the bottom (find this in the menu 'Plate - Plate setup'). Remove the protection foil from the engraving material and activate the vacuum. Focus the laser beam - and off you go!
For an increased vacuum strength, cover unused parts of the table with paper.
Select the engraving start position as 'bottom'. This prevents deposits from setting on engraved areas which could discolour the product.
Use the Z-Offset to obtain a more homogeneous engraving result. Depending upon the design, adjust to max. 3mm in the +.
If colour residues are present, check the parameters, focus and that the laminate is flat on the table.